Andy Company 安迪公司
 

简体中文  English
 

 

Tube Furnace 300 to1200C heated by Resistance Wire| Tube Furnace 1300 to 1400C heated by SiC Elements| Tube Furnace 1500 to 1800C heated by MoSi2 Element| Multi Zones Tube Furnaces| Vertical Tube Furnaces| Rotary Tube Furnaces| Ceramic Fiber Furnace Lining| Furnace Accessories|

High Temperature Tube Furnace

         Three Models:

  • 1750C High Temperature Tube Furnace
    1800C MoSi2 Heating Elements
    1750C Grade Refractory Lining
    1800C 99.7% alumina tube
  • 1650C High Temperature Tube Furnace
    1700C MoSi2 Heating Elements
    1700C Grade Refractory Lining
    1700C 99.0% alumina tube
  • 1450C High Temperature Tube Furnace
    1450C SiC Heating Elements
    1700C Grade Refractory Lining
    1600C 95.0% alumina tube
  • Model

    Alumina Tube size OD x ID x L   

    Max Temp (C)

    AY-TF-60-175

    60mm x 50mm x 1000mm          

    1750

    AY-TF-60-165

    60mm x 50mm x 1000mm           

    1650

    AY-TF-60-145

    60mm x 50mm x 1000mm           

    1450

     

     

    AY-TF-80-175

    80mm x 70mm x 1000mm           

    1750

    AY-TF-80-165

    80mm x 70mm x 1000mm           

    1650

    AY-TF-80-145

    80mm x 70mm x 1000mm           

    1450

     

    AY-TF-100-175

    100mm x 90mm x 1000mm          

    1750

    AY-TF-100-165

    100mm x 90mm x 1000mm         

    1650

    AY-TF-100-145

    100mm x 90mm x 1000mm          

    1450

     

     

     

    AY-TF-120-175

    120mm x 110mm x 1000mm         

    1750

    AY-TF-120-165

    120mm x 110mm x 1000mm         

    1650

    AY-TF-120-145

    120mm x 110mm x 1000mm          

    1450


    Model AY-TF-60/80/100/120-175

    Products Introduction

    AY-TF-60/80/100/120-175 series tube furnace uses 1800C MoSi2 heating elements as its heating element. Hearth is built with Ai2O3 fiber materials. Temperature of this furnace is controlled by high precise SCR power controller with +/-1 °C accuracy and 51 programmable segments up to 1750°C This furnace is built with double layer steel casing and air cooling, two cooling fans inside the case keep the temperature lower. The tube is sealed by stainless steel vacuum sealed flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use.

    Tube Materials

    1800C 99.7% High purity alumina Tube

    Tube Size

    OD: 60 /80/100/120mm in diameter  x 1000 mm length

    Thermocouple

    High Quality Type B Thermocouple

    Max. Working Temperature

    1750C

    Refractory Lining

    1750C grade fiber alumina

    Heating Element

    1800C MoSi2 heating elements

    Normal Working Temperature

    0-1650 o 

    Temperature Controller

    PID automatic control via power control, e.g. current limiting phase angle fired the resistor  with 51 steps programmable

    Max. Heating / Cooling Rate

    oC /min above 1200 oC and 5 oC/min below 1200 o 

    Constant Temperature Zone

     150 mm

    Temperature Accuracy

     +/- 1 oC (+/- 1.8 oF)

    Vacuum Seal Kit

     60 /80/100/120mm diameter stainless steel vacuum seal assembling with one vacuum gauge, two valves and Four porous ceramic blocks are included.

    Input

     Single Phase, 208 - 240V AC,  50/60 Hz

    Output

     Max. 5KW

    Dimension

     550 L x 450 W x 670 H  mm

    Net Weight

     120 kgs

    Weight of Shipment

     162 kgs

    The following is standard product specifications. Our company can also customize the product based on your business needs.


    Model AY-TF-60/80/100/120-165

    Products Introduction

    AY-TF-60/80/100/120-165 series tube furnace uses 1700C MoSi2 heating elements as its heating element. Hearth is built with Ai2O3 fiber materials. Temperature of this furnace is controlled by high precise SCR power controller with +/-1 °C accuracy and 51 programmable segments up to 1650°C This furnace is built with double layer steel casing and air cooling, two cooling fans inside the case keep the temperature lower. The tube is sealed by stainless steel vacuum sealed flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use.

    Tube Materials

    1700C 99.0% High purity alumina Tube

    Tube Size

    OD: 60 /80/100/120mm in diameter  x 1000 mm length

    Thermocouple

    High Quality Type B Thermocouple

    Max. Working Temperature

    1650C

    Refractory Lining

    1700C grade fiber alumina

    Heating Element

    1700C MoSi2 heating elements

    Normal Working Temperature

    0-1600 o 

    Temperature Controller

    PID automatic control via power control, e.g. current limiting phase angle fired the resistor  with 51 steps programmable

    Max. Heating / Cooling Rate

    oC /min above 1200 oC and 5 oC/min below 1200 o 

    Constant Temperature Zone

     150 mm

    Temperature Accuracy

     +/- 1 oC (+/- 1.8 oF)

    Vacuum Seal Kit

     60 /80/100/120mm diameter stainless steel vacuum seal assembling with one vacuum gauge, two valves and Four porous ceramic blocks are included.

    Input

     Single Phase, 208 - 240V AC,  50/60 Hz

    Output

     Max. 5KW

    Dimension

     550 L x 450 W x 670 H  mm

    Net Weight

     120 kgs

    Weight of Shipment

     162 kgs

    The following is standard product specifications. Our company can also customize the product based on your business needs.

     

    Model AY-TF-60/80/100/120-145

    Products Introduction

    AY-TF-60/80/100/120-145 series tube furnace uses SiC as its heating element. Hearth is built with Ai2O3 fiber materials. Temperature of this furnace is controlled by high precise SCR power controller with +/-1 °C accuracy and 51 programmable segments up to 1450°C This furnace is built with double layer steel casing and air cooling, two cooling fans inside the case keep the temperature lower. The tube is sealed by stainless steel vacuum sealed flanges, it can be used under vacuum and other gases condition. This tube furnace is an ideal tool for sintering all types of materials/chemical. Great for labs or college scientific research use.

    Tube Materials

    1600C 95% High purity alumina Tube

    Tube Size

    OD: 60 /80/100/120mm in diameter  x 1000 mm length

    Thermocouple

    High Quality Type B Thermocouple

    Max. Working Temperature

    1450C

    Refractory Lining

    1700C grade fiber alumina

    Heating Element

    1450C SIC heating elements

    Normal Working Temperature

    0-1400 o 

    Temperature Controller

    PID automatic control via power control, e.g. current limiting phase angle fired the resistor  with 51 steps programmable

    Max. Heating / Cooling Rate

    oC /min above 1200 oC and 5 oC/min below 1200 o 

    Constant Temperature Zone

     150 mm

    Temperature Accuracy

     +/- 1 oC (+/- 1.8 oF)

    Vacuum Seal Kit

     60 /80/100/120mm diameter stainless steel vacuum seal assembling with one vacuum gauge, two valves and Four porous ceramic blocks are included.

    Input

     Single Phase, 208 - 240V AC,  50/60 Hz

    Output

     Max. 5KW

    Dimension

     550 L x 450 W x 670 H  mm

    Net Weight

     80 kgs

    Weight of Shipment

     120 kgs

    The following is standard product specifications. Our company can also customize the product based on your business needs.

     
Address: No.2-110,DongFeng Road, Zhengzhou city, Henan, China
豫ICP备07007972号
Telephone: 86-138-3855 0579 EMail: sales@andygroup.com shiransophie@hotmail.com